Product classification
1
-
Graphite Filled PTFE Teflon Sheet Material Polytetrafluoroethylene
Expanded PTFE Teflon sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.PTFE Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. Some of its features are that it has Good Flexibility, Good Seal ability, highly compressible, Non Contaminating, and Non Toxic etc.
-
Low Compressive / Tensile Strength Filled PTFE Sheet For Seals
Tefon resin is first molded into work-blank and then skived. Teflon sheets are known as flexible or thin sheets.It recognized as the first fluorocarbon material in the world and referred to as PTFE or Teflon, it is the most chemically resistant plastic known. It has a working temperature range of minus -180°c to 260°c It also has a very low coefficient of friction excellent thermal and electrical insulation properties and is commonly used in food contact applications. It provides good thermal stability and has good electrical properties, but is not suitable for wear application and is difficult to bond.
-
Water resistance PTFE Teflon Sheet PTFE Slide Bearing For Pipelines
PTFE Teflon slide bearing commonly known as teflon bearing or PTFE bearing - is manufactured by technics of molding, sintering and finalizing the design to various sizes with PTFE suspension resin. It can be adhered to rubber and metal with one side etched. And different fillings can be used to achieve special demands. PTFE slide bearing can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. PTFE bearing slide is made from high strength PTFE suspension resin by methods of moulding, sintering and finalizing the design to various sizes. Different fillings can be used to achieve special demands. It can also be adhered to rubber and metal with one side etched.
-
Water resistance PTFE Teflon Sheet PTFE Slide Bearing For Pipelines
PTFE Teflon slide bearing commonly known as teflon bearing or PTFE bearing - is manufactured by technics of molding, sintering and finalizing the design to various sizes with PTFE suspension resin. It can be adhered to rubber and metal with one side etched. And different fillings can be used to achieve special demands. PTFE slide bearing can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. PTFE bearing slide is made from high strength PTFE suspension resin by methods of moulding, sintering and finalizing the design to various sizes. Different fillings can be used to achieve special demands. It can also be adhered to rubber and metal with one side etched.
-
White PTFE Coated Fiberglass Fabric High Temperature Expanded
Expanded PTFE Teflon sealing tape(Teflon Sealant Joint Tape) is made with un-sintered PTFE/Teflon. PTFE is resistant to all chemical products and solvents with the exception of alkaline materials. It has good resistance to elevated pressures and has a high thermal stability. Expanded PTFE sealing tape is odourless and tasteless making it suitable for food applications and is WRC approved for use with potable water. Expanded PTFE Teflon sealing tape is a kind of dynamic sea. It has extremely low coefficient of friction, non abrasion, excellent seal ability, does not hydrolyze and so on
-
Skived High Temperature Fiberglass Tape Bronze Filled Teflon
Skived PTFE Teflon tape commonly known as teflon film or PTFE film - is manufactured by technics of compacting, sintering, rotary cutting with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of skived teflon PTFE film has similar friction levels to ice. Skived teflon PTFE film can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Skived PTFE Teflon tape can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.
-
Light Weight PTFE Teflon Sheet , Non-Flammable Black PTFE Slide Bearing
PTFE Teflon slide bearing commonly known as teflon bearing or PTFE bearing - is manufactured by technics of molding, sintering and finalizing the design to various sizes with PTFE suspension resin. It can be adhered to rubber and metal with one side etched. And different fillings can be used to achieve special demands. PTFE slide bearing can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. PTFE bearing slide is made from high strength PTFE suspension resin by methods of moulding, sintering and finalizing the design to various sizes. Different fillings can be used to achieve special demands. It can also be adhered to rubber and metal with one side etched.
-
Extruded PTFE Teflon Rod / Pure White PTFE Rod For Electrical , Long Durability
Extruded PTFE Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Extruded PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.