Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Extruded PTFE Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Extruded PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of Teflon rod has similar friction levels to ice. Teflon rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Teflon Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
Extruded PTFE Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Extruded PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
PTFE rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
Extruded PTFE Teflon tube is manufactured by technics of extruding method in the diameter from 0.5 to 250mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE tube has similar friction levels to ice. Extruded teflon PTFE tube can work at -180°C ~+260°C and is the best electrical insulator of all known plastics. Teflon Tube has the best electrical properties of all plastic.
PTFE Teflon hose assembly is mainly composed of inner Teflon hose (ideal anti-corrosion material) and stainless steel braid outside for protection and loaning pressure, with buckled metal connectors on both ends. Teflon PTFE hose has the advantages of chemical corrosion resistant, anti-aging, anti-high and low temperature and electrically insulated. Teflon PTFE hose is usually applied to transmit highly corrosive fluid, gas and various chemicals, fuel and lubricant or in oil, gas and hydraulic pressure system. It is widely used in many fields, such as aviation, steel, automobile, electronic industry and mechanical industry, etc.