Product classification
1
-
Pure White PTFE Teflon Rod / PTFE Teflon Square Bar For Electrical Insulation , Long Durability
PTFE Teflon Square Bar is a low friction fluorometry with outstanding chemical and weathering resistance. The working temp range is -20° F to 500° F. It has the lowest coefficient of any solid. It has no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to unheated surfaces. Both virgin and mechanical grades are UV stabilized. PTFE Teflon Square Bar easily fits into compatible grooves, slots, and ways without additional machining. Smaller sizes will bend (within limits) to conform to bends in the fitting groove or slot. Made of unfilled virgin PTFE square bar is inert, frictionless, and non-reactive and works in applications from -350F to +500F. Different lengths are available on special order
-
Natural White Virgin Molded PTFE Rod Self Lubricating With High Performance
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
-
High Chemical Resistant Natural Filled Teflon Rod With Long Durability
Filled PTFE Teflon rod is manufactured by technics of molding method in the diameter from 5mmto 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of filled teflon PTFE rod has similar friction levels to ice. Extrusion teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Filled PTFE Teflon rod has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber, metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.
-
2.20g/cm³ White PTFE Teflon Rod For Anti-Sticking Materials , 150% Elongation
PTFE Teflon Square Bar is a low friction fluorometry with outstanding chemical and weathering resistance. The working temp range is -20° F to 500° F. It has the lowest coefficient of any solid. It has no slip-stick characteristics; static and dynamic coefficients are equal. Nothing sticks with any strength to unheated surfaces. Both virgin and mechanical grades are UV stabilized. PTFE Teflon Square Bar easily fits into compatible grooves, slots, and ways without additional machining. Smaller sizes will bend (within limits) to conform to bends in the fitting groove or slot. Made of unfilled virgin PTFE square bar is inert, frictionless, and non-reactive and works in applications from -350F to +500F. Different lengths are available on special order
-
Molded PTFE Teflon Rod / PTFE Rod For Bonding , 100mm - 3000mm
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
-
Molded PTFE Teflon Rod / PTFE Rod For Bonding , 100mm - 3000mm
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
-
Extruded Polytetrafluoroethylene Rod For Mechanical , High Temperature Resistance
Extruded PTFE Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Extruded PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.
-
White Virgin Molded PTFE Teflon Rod Self Lubricating Natural Durability
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
-
High Abrasion Resistant PTFE Rod Extremely Strong Agglutination
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
-
Bronze Fiber PTFE Teflon Rod Glass Carbon Graphite / Beads Filled
Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.